All available Rat GUI versions at a glance
Rat GUI operates under a floating license key model. This means that a single license key may be installed on multiple devices and used by multiple users, but only one active instance of Rat GUI may run at any given time.
Downloading, accessing and using Rat GUI, including any trial version, is subject to our General Terms and Conditions and our Individual Use Terms (together, the “Terms”), which must be accepted during installation. By downloading, installing and/or using the Rat GUI, you agree to these terms.
| Version | Windows | MacOS | Linux | Release date |
|---|---|---|---|---|
| 3.004.5 | Windows | macOS | AppImage | November 6, 2026 |
|
Rat GUI version 3.004.5 is a maintenance release. Versions 3.004.3 and 3.004.4 were not distributed, so these notes cover all changes since 3.004.2. This release holds on to much less memory than 3.004.2, on the GPU and in main memory, and it fixes other reported problems. If you are upgrading from version 2, please also read the notes of 3.004.2 below.
Before you upgrade
Installing on Windows
The Windows installer is signed by Little Beast Software B.V. with a new code signing certificate. Until Microsoft SmartScreen has seen enough downloads of it, Windows may stop the installer with the message "Windows protected your PC". Click More info and then Run anyway to continue the installation. To check that a download is ours, see Checking your download.
Professional NVIDIA cards: GPU memory keeps growing
With the NVIDIA 615 driver on a professional card (RTX A-series, formerly Quadro), the driver's "threaded optimization" makes Rat GUI use more and more GPU memory the longer it stays open (see the notes of 3.004.2 below).
Linux signature file: rat-gui-3.004.5-linux.AppImage.sig |
||||
| 3.004.2 | Windows | macOS | AppImage | October 28, 2026 |
|
Rat GUI version 3.004.2 is a major release. Every field in the model can now hold an expression, time-dependent models are written as formulas, and Rat GUI can be driven by Lua scripts and, as a free beta, by an AI assistant. It also brings new solvers, help text for every setting, a new look and many fixes.
Installing on Windows
The Windows installer is signed by Little Beast Software B.V. with a new code signing certificate. Until Microsoft SmartScreen has seen enough downloads of it, Windows may stop the installer with the message "Windows protected your PC". Click More info and then Run anyway to continue the installation. To check that the installer is ours: right-click it, choose Properties > Digital Signatures and check that the signer is Little Beast Software B.V. Or compare its SHA-256 checksum, shown in PowerShell by
Professional NVIDIA cards: GPU memory keeps growing
With the NVIDIA 615 driver on a professional card (RTX A-series, formerly Quadro), Rat GUI may use more and more GPU memory the longer it stays open, up to many GB, until a calculation on the GPU runs out of memory. Quitting Rat GUI frees it again. The cause is the driver's "threaded optimization", which does not free the memory of the screen drawing; it is not a leak in Rat GUI's calculations. Version 3.004.5 switches it off on Linux by itself. In 3.004.2:
You can download the Linux signature file here: |
||||
| 2.024.6 final v2 |
Windows | macOS | AppImage | July 24, 2026 |
|
The last and final version of Rat GUI 2. Rat GUI 2 receives no further updates. This release is for those who keep using version 2 for now: the window title can be locked, the license server is only contacted from the main thread (fewer license errors), and the centre of the regular polygon (DFRegPolygon) can be edited. Models from 2.024 open in 3.004.2, so you can upgrade whenever it suits you.
You can download the Linux signature file here: |
||||
| 2.024.4 | Windows | macOS | AppImage | July 09, 2026 |
|
This is a patch for Rat GUI version 2.024.2 with minor bug fixes and library updates.
You can download the Linux signature file here: |
||||
| 2.024.2 | Windows | macOS | AppImage | July 03, 2026 |
|
Rat GUI version 2.024.2 includes many changes across visualization, post-processing, import and export, meshing, field calculations, and the nonlinear solver. It also includes a large internal overhaul of the field engine and solver libraries used by Rat GUI.
You can download the Linux signature file here: |
||||
| 2.022.2 | Windows | macOS | AppImage | May 18, 2026 |
|
In short this version includes bug fixes, improved postprocessing capabilities, rendering stability fixes, better DPI handling, workflow refinements, and expanded testing and build maintenance. The changelog is given below.
You can download the Linux signature file here:
An the public key here: |
||||
| 2.021.2 | Windows | macOS | AppImage | April 7, 2026 |
|
A full list of new features, bug fixes and improvements has been published on our news page. From this version on, whenever there is an update of Rat GUI available the user will get a pop-up message inside Rat GUI. The user can then browse to this page to download the latest version of the software. On Linux we had to create a new signature file. You can verify the signature as follows:
|
||||
| 2.020.4 | Windows | macOS | AppImage | December 8, 2025 |
|
This update includes the following new features and bug fixes:
|
||||
| 2.020.3 | Windows | macOS | AppImage | November 5, 2025 |
This update includes the following changes. Fix of the framebuffer issue, viewport going black, when resizing the GUI. This was only noticeable on newer graphics cards for some reason. HTS tape fractions are now correctly updated when the core is edited. The license manager has undergone a major overhaul. It now executes network operations asynchronously. Splash screen no longer waits for license server connection, but there is a 10 second allowance window for the server to connect. Show "status" in license manager window to check who is using your license. When internet connection fails the user can continue to use Rat for a short duration. Heartbeat timer shown in the GUI. FreeCAD export overhaul. Massive speedup when building large geometries by avoiding the use of the FreeCAD document objects. Ruled surfaces are improved by manualy setting "Parameters" on the splines. This means it can now accurately handle Frenet-Serret frames. I.e. use ruled surfaces for everything unless you want to experiment with other construction methods. Added combine sections option for try building a single conductor. Improved GUI output when enableed. Fixed export of single lines to FreeCAD sometimes failing on "shape is not an edge". Calculate All option in the right click dropdown menu when multiple calculations are selected. This update was patched on October 14th, 2025. |
||||
| 2.020.1 | Windows | macOS | AppImage | September 1, 2025 |
In this update we introduce the renewed Export FreeCAD calculation. In this version the export speed is much faster, and has a lot of user-acccesible FreeCAD settings. |
||||
| 2.019.1 | Windows | macOS | AppImage | July 21, 2025 |
This update has mainly bug fixes and performance improvements. |
||||
| 2.018.7 | Windows | macOS | AppImage | May 30, 2025 |
In this update new Source and Target types are introduced. This allows the user to control the accuracy of the computations versus the calculation speed. These new source and target types are explained in the latest tutorial on our YouTube channel. Models made with earlier version of Rat can still be used in the same way as before. Recently we have also uploaded a tutorial on the MLFMM, we recommend watching both videos to understand how accuracy and calculation speed can be effectively managed in Rat. A cheat sheet with the different sources and targets can be downloaded here. |
||||
| 2.018.6 | Windows | macOS | AppImage | April 2, 2025 |
This update includes a fix for issues experienced by some users with NVIDIA RTX 2000 series graphics cards. Previously, affected users encountered a black screen at startup due to a bug in the latest graphics driver. To address this, we have implemented a workaround in Rat GUI that ensures proper functionality despite the driver issue. Everyone is encouraged to download this version, as future driver updates for other graphics cards may introduce similar issues. |
||||
| 2.018.5 | Windows | macOS | AppImage | March 14, 2025 |
This update primarily includes bug fixes, and all users are encouraged to download it at their earliest convenience. |
||||
| 2.018.4 | Windows | macOS | AppImage | February 20, 2025 |
This update should have more accurate results in the force calculation, and the accuracy of the calculated peak field in coils should be improved. In addition, the automatic scaling of the solution vector was changed to improve convergence of the iron solver. The Path XYZ File can now take orientation vectors as additional input in the file. And as always small bug fixes have been applied to this version. Moreover, the Linux AppImage has been compile with an older version of Linux that has the libc version 2.28, which should be compatible with most Linux distributions that are used nowadays. The Linux AppImage is still in the beta phase, if you have any feedback please let us know. |
||||
| 2.018.2 | Windows | macOS | AppImage | December 18, 2024 |
This update contains mainly bug fixes, which are given below.
|
||||
| 2.018.1 | Windows | macOS | N.A. | October 9, 2024 |
This update introduces several important bug fixes and new features aimed at enhancing functionality. A bug affecting the mass density calculation has been resolved; this fix allows mass fractions to be combined correctly instead of volume fractions, resulting in a minor improvement in material density and thus also the heat capacity. Additionally, the circular cross-section now maintains its cross-sectional area that is independent of element size, achieved through mesh rescaling to ensure accuracy. In the Quench Calculation, the protection measures are now triggered immediately if the detection voltage is exceeded at time zero. The particle tracker has been enhanced to automatically rescale colormaps when data is updated. We have also introduced a random noise function utilizing hash tables, enabling the offsetting of winding packs to analyze manufacturing tolerances. The functionality for importing XYZ Files/Tables has been expanded to calculate orientation vectors based on a cylinder, in addition to a flat plane. Furthermore, a new menu option has been added to the Mesh Calculation post-processor, which is used to select the angle used for critical current and temperature margin calculations. Additionally, the optimization of the path connector has been improved to enhance stability, and a bug related to importing edge files formatted for Windows has been corrected. To facilitate the export of Rat models to FreeCAD, a preliminary FreeCAD Calculation has been included. The option to use "Home -> Export -> FreeCAD" remains available. Finally, we have added two new classes: the Ellipse Path and the Elliptical Arc within the Path Group, broadening the available path drawing options for users. |
||||
| 2.017.9 | Windows | macOS | N.A. | August 8, 2024 |
Bug fixes for importing Windows files. |
||||
| 2.017.8 | Windows | macOS | N.A. | July 17, 2024 |
Bug fixes, and for the Critical Current Calculation and other superconducting properties the user can now select which angle is used. |
||||
| 2.017.7 | Windows | macOS | N.A. | May 9, 2024 |
This version includes mainly bug fixes, namely a bug fix for the calculation losing track of the model after using duplicate, but instead using an old version of the model (i.e. the calculation does not update after changes to the model). Models with this issue are fixed automatically upon loading them in the GUI. The particle tracking now uses momentum instead of velocity. This is more stable when using high energy (>GeV) relativistic particles, for the previous version the default tolerances in the GUI were almost always to loose. We also added opera conductor file import, only 8 node bricks are supported. Consecutive bricks are automatically connected by Rat. A Coil from Edges now checks the order of the edges to prevent inverted elements resulting in negative inductance. A bug fixed by increased number of iterations used by linear solver when calculating inductance including iron. Added drop down menu when right clicking in Viewport on Coils. Using binary input and output streams to avoid Windows special line ending characters. This fixes saving and loading json.gz files in Windows. And finally, since we are changing domain names while we are moving: the website links in the GUI are changed to https://rat-gui.com instead of https://rat-gui.ch. |
||||
| 2.017.6 | Windows | macOS | N.A. | April 17, 2024 |
This is a patch for version 2.017.5, where the main update in the Rat GUI for this version is the addition of the 1D normal zone propagation option to the adiabatic quench model. This means that the voltage is calculated based on the nzp along a line, based on the chosen material properties, which makes the Adiabatic Quench Calculation more accurate, especially in the case of HTS materials. Next, the "bloom" post-processing effect was added. This simulates scattering of light in a camera lens giving bright areas a subtle glow when using dark themes. Fixed the gradient banding issue in the background color by using a simple dithering technique. Added a basic load-line plot that can be accessed in the Mesh Calculation "Analyse Menu" of the post-processor. This plot will be extended with more options in future releases. Added a 180 deg flip button to the View Menu so that you can look at your coils from the other side. There were some minor bug fixes and the MacOs screenshot sticky keys problem fixed itself. |
||||
| 2.017.3 | Windows | macOS | N.A. | March 13, 2024 |
Animation in the particle tracking post-processor, using Runge-Kutta-Fehlberg 45 for adiabatic quench simulation, added CSV export to adiabatic quench simulation post processor window, fixed bug in current lead 2 option in the Regular CCT path, added "Places" feature to the load/save filedialog where the user can select folders, improved transparency in the Grid Calculation, fixed bug in renderer not correctly outputting the transparency, added transparency buttons for some of the colormaps in the post-processors (consider this a beta feature, we are aware of some visual bugs), changed reverse button to be a check box that doesn't close the drop down menu, forced Custom and Regular CCT Paths to have the transverse direction outward at the first coordinate along the path. If you have experience using reversals here please use "flip". We are pleased to announce that nT-tao sponsered the implementation of time dependent magnetic and electric fields during particle tracking. We appreciate their support in helping us improve the Rat GUI. Thank you, nT-tao, for your valuable contribution. The time dependent particle tracking includes: fieldmap is now time dependent and calculates both flux density and electric field, due to changing coil currents. The Lorentz force calculated in the Rat GUI is updated accordingly. The electric field is generally quite a weak force. Need very fast field changes, or long time scales to notice the effect. The time changing field must be set by adding a circuit to the tracking calculation. The start time for the tracks is the time of the simulation, and in addition to tracking flux lines, tracking electric field lines is added as well. |
||||
| 2.017.2 | Windows | macOS | N.A. | February 17, 2024 |
Major update, please read the full change-log on our news page. |
||||
| 2.016.5 | Windows | macOS | N.A. | January 15, 2024 |
With this update we include the voltage calculation in the Adiabatic Quench Calculation, and there is a bug fix in the polar grid calculation. For more information, please visit our news page. |
||||
| 2.016.3 | Windows | macOS | N.A. | December 12, 2023 |
This version features the new Adiabatic Quench Calculation, and many new post-processing features. For more information, please visit our news page. |
||||
| 2.016.2 | Windows | macOS | N.A. | November 7, 2023 |
Bug fixes. |
||||
| 2.016.1 | Windows | macOS | N.A. | October 29, 2023 |
This version features an enhanced iron solver, along with various significant bug fixes and improvements. As of this release, we are also introducing a beta version for macOS, compatible with Apple computers that run on Apple Silicon and support macOS Sonoma. Additionally, we have updated the user manual to incorporate instructions for the macOS installation. |
||||
| 2.016.0 | Windows | N.A. | N.A. | September 19, 2023 |
We hope everyone has safely returned to their offices and is ready to test the Rat GUI. During the MT28 conference, we identified two minor bugs, which we have now addressed in this version. These pertained to importing an edge matrix and to the higher order harmonics of the Cosine Theta coil. Meanwhile, we are also in the process of creating video tutorials which can be downloaded here. |
||||
| 2.015.8 | Windows | N.A. | N.A. | September 13, 2023 |
Hotfix for a license key issue. |
||||
| 2.015.7 | Windows | N.A. | N.A. | August 20, 2023 |
This is the first version of the Rat GUI with the non-linear solver. In addition, minor bugs were fixed, and many tooltips were added. |
||||
| 2.015.4 | Windows | N.A. | N.A. | June 5, 2023 |
This update includes many bug fixes, for instance with grouping and up-grouping coils. The Point(s) and Line Calculation Node Editor and post-processors have been polished. The CPU and battery consumption of Rat have been reduced when Rat is not actively being used. This is achieved by reducing the frame rate when not active. Several new Paths were added. We continue to put all our efforts towards the non-linear solver and the inclusion of it in the Rat GUI. Therefore, the mesher was updated as well. |
||||
| 2.015.3 | Windows | N.A. | N.A. | May 9, 2023 |
In this version of Rat the method for calculating the magnetic field and flux density of permanent magnets has been reworked. This is a first step towards a solver for non-linear magnetic materials that will be added to Rat in September of this year. Some examples were added, for example the Magnetized Sphere. A few bugs and inconveniences were resolved as well. For instance, arrow heads were added to the field lines in the post-processor menu of the Plane Calculation. The memory was reduced and the accuracy was fixed for the Direct Biot-Savart method. The bugs in the Trapezoidal Coil were fixed, and an option for importing point tables from a file as implemented for the Point Calculation, and finally the issue with parallel conductor not being displayed correctly was fixed. |
||||
| 2.015.2 | Windows | N.A. | N.A. | March 22, 2023 |
Minor bug fixes. |
||||
| 2.015.0 | Windows | N.A. | N.A. | December 6, 2022 |
The following features were added: custom colors, clipping a ModelGroup, allow for a CrossSection to vary along the length: can be done through the options "Coil from edges", "Local offset Path". Import of edge matrices as coil from edges, enable/disable parts of the model tree, further improvements and bug fixes for Frenet-Serret CCT's, FreeCAD export now prefers the ruled edges method if possible, FreeCAD export now matches the tree structure of the Rat model, a Path Connector for creating smooth transitions between two paths was added, which is useful for for making layer jumps and current lead connections. Improved performance in particle tracking when using the GPU, path imported from XYZ coordinates in a comma separated value file, a view option to combine sections. Fixed a bug with CustomCCT that occurs in bend coils with a varying radius along the length, the max depth is now persistent, mini-plots can be exported to CSV file by right clicking on them and the CCT table Path bug fix for not correctly interpolating harmonics along length. |
||||
| 2.014.0 | Windows | N.A. | N.A. | July 19, 2022 |
From this version on, if you have an invalid object in the Model Browser there is an error message in the tool-tip next to the object. In the Plane Calculation you can now visualize your coil cross-section in the 2D plot, and you can show the magnetic field as a vector plot. |
||||
| 2.013.4 | Windows | N.A. | N.A. | June 22, 2022 |
This is a patch to version 2.013.3, with an important bug fix for the Frenet-Serret PathGroup and Frenet-Serret Custom CCT. Please install it as soon as possible, especially when you are using Frenet-Serret paths in your models. There was a mistake in one of the formulas defining the Frenet-Serret PathGroup that caused for having too little hard-way bend. The same thing was found for the Custom CCT Frenet-Serret with a variable radius. To allow users to check this for their design a new PathGroup was added named Unfold. This Group unfolds the cable you have in your design along the transverse vectors to make it flat. This can be used to check the hard-way bend of the ribbon or cable in your model. To prevent similar bugs in the future a unit test was added in Rat that checks this unfolding for a few different geometries. |
||||
| 2.013.3 | Windows | N.A. | N.A. | June 8, 2022 |
This version contains significant updates to the custom CCT path to allow for analytically calculating the space curve derivatives when needed for the Frenet-Serret equations, which describe a hard way bend free ribbon. Instead of using a Frenet-Serret object, the Frenet-Serret equations should be activated using a checkbox inside the custom CCT path. The derivatives are also included in the internal bending transformation. This version should be is compatible with old Rat GUI models, and automatically converts old Rat GUI models to the new standard. However, should you run into troubles please contact us at info@rat-gui.com. Then a Drive was added for calculating the radius vs. theta in a custom CCT. By using non-circular cross-sections it is possible to produce CCT coil geometries out of a hard-way bend free Frenet-Serret ribbon, in which the ribbon is perpendicular to the surface of the former in the roots of the axial (z) equation. This allows for increasing the packing fraction for such coils significantly. The geometry is calculated using the surface of a cone, which is an extension to the constant perimeter cylinder commonly used in Cos-Theta magnet ends. A technical report/paper describing the methodology is under construction. Feel free to ask us for a draft. A sextupole example of such a coil can be opened using: Home -> Start from Example -> Perp FS-Sextupole. Next we improved the FreeCAD macro exporting interface to deal properly with the Darboux vectors resulting from the Frenet-Serret frame. These vectors are not perpendicular to the tape edge and thus the previous ruled surface approach in FreeCAD did not produce entirely correct geometry. This improvement is necessary for example when exporting Frenet-Serret CCT coils and Cloverleaf coils. The Rat GUI now allows for exporting non-rectangular conductors to FreeCAD macro, this approach uses a series of cross-sections which are connected through a loft. This method is only used when the number of edges is unequal to four. Currently only a few non-rectangular cross sections are available (in the Rat GUI). More will be added in the future. This update also includes two minor changes, which are the addition of colored text in the geometry tabs to indicate better which document is active and thus displayed in the tree/node editors, added stumpness parameter b to the CCT Harmonics to flatten the sines and cosines used for the z-equation, and a plasma ring coil for modelling the Tokamak plasma shape. Currently the current distribution is assumed homogeneous. Finally there were some minor bug fixes: we fixed a bug where the n property of Lubell Kramer fit was incorrectly saved and thus fixed to a value of 1.7 in the calculations. In addition, we fixed the tooltip where this n was completely missing from the equation. And we fixed a bug causing the Rat GUI to freeze when closing multiple geometry windows simultaneously, while multiple unsaved models are open. |
||||
| 2.013.1 | Windows | N.A. | N.A. | April 19, 2022 |
| This is a patch to version 2.013.0 where we've updated the Regular CCT Wrapper model. The CCT (skew) and CCT (ampl) have been made into one wrapper. We've also changed the definition of the CCT such that the amplitude is no longer scaled with the number of magnetic poles. This version should be is compatible with old Rat GUI models, and automatically converts old Rat GUI models to the new standard. However, should you run into troubles please contact us at info@rat-gui.com. Finally, we've also added the "Open Recent" option to the Home Menu, so that you can quickly open the models you've saved most recently. See our News page for more information. | ||||
| 2.013.0 | Windows | N.A. | N.A. | April 14, 2022 |
| This update includes: color themes that can be found under "Settings -> Themes", Fleiter-Bristow fit type for REBCO coated conductor (in contrast to the regular Fleiter fit it is bound to a finite value at zero field, making it better behaved in the low field range), several HTS tape fits based on data from RRI and Tohoku university (note that the RRI data fits are based on measured data up to 8 T and the Tohoku fit (Fujikura FESC) on data up to 24 T, extrapolation outside of these ranges will not cause the fit to misbehave, but the accuracy is no longer guaranteed), added option to bend CCT with either radius or bending angle, added option to export the nodal data from a mesh calculation to a comma-separated value table, changed tooltip "question mark" icon to make it more visible, you can now plot angular deviation with respect to start or end of the track in the Track calculation, added a plasma ring coil with uniform current density, and you can now save individual nodes to a file and load them back in using: "Right click -> Edit Nodes -> Save to/Append from file". | ||||
| 2.012.2 | Windows | N.A. | N.A. | March 8, 2022 |
| This update includes: the material editor, building custom CCTs from CSV files, barycentric rational interpolation for setting smooth curves for pitch, radius and harmonics in a custom CCT, new camera for orthographic view with options to set the orientation axis, export to Abaqus files for importing Rat models in for instance Geant4, and minor bug fixes. | ||||
| 2.012.0 | Windows | N.A. | N.A. | February 14, 2022 |
| First released Rat GUI | ||||
Every installer is signed, so you can check that it comes from us and that it has not changed. A checksum is a second way to check the file itself.
Right-click the installer, choose Properties > Digital Signatures and check that the signer is Little Beast Software B.V. Or compare its SHA-256 checksum with the list below; PowerShell shows it with Get-FileHash rat-gui-3.004.5-windows.exe.
The application is signed and notarized by Apple. After installing, run spctl -a -vv /Applications/rat-gui.app in Terminal. The output should say accepted, source=Notarized Developer ID and origin=Developer ID Application: Little Beast Software B.V. (S4V7DW5J47). To check the checksum of the disk image, use shasum -a 256 rat-gui-3.004.5-macos.dmg.
The AppImage is signed with GPG. Download its .sig file, linked with each release, and our public signing key: rat-gui-release-signing-key.asc. Then run:
$ gpg --import rat-gui-release-signing-key.asc
$ gpg --verify rat-gui-3.004.5-linux.AppImage.sig rat-gui-3.004.5-linux.AppImage
The output should say Good signature from "Little Beast Software B.V. (RatGUI Linux release signing) <info@rat-gui.com>" and show the primary key fingerprint B31E 93F5 B414 5A63 D8B3 6431 683B A776 3CCB BD38. gpg also warns that the key is not certified with a trusted signature. That warning is normal for a key you have not certified yourself, so compare the fingerprint above. For the checksum, use sha256sum rat-gui-3.004.5-linux.AppImage.
| Installer | File | SHA-256 |
|---|---|---|
| Windows | rat-gui-3.004.5-windows.exe | B694D8219A1AA2C043C1216898FA00C64309698768DED32D3548DC09D3BB7A5E |
| macOS | rat-gui-3.004.5-macos.dmg | 94E0EC91F1E636890B3BC6A8FAB27722AA85F551247FEEBFFFCBF81430829B53 |
| Linux | rat-gui-3.004.5-linux.AppImage | 5027F2DAE95ADA059E6057349BC86188B33E69863918DD03140D3A5D616CD3F9 |
| Windows, Raccoon | rat-gui-3.004.5-raccoon-windows.exe | 486CDE383BE371C70A83BE98BB3BE01CE7540836C9ABE75E367A3FEE922CDDAF |
| macOS, Raccoon | rat-gui-3.004.5-raccoon-macos.dmg | 5DBD5F916C71C044C98DD999C829254DB1222716CB8860CCBFCB7D6AF0964DBE |
| Linux, Raccoon | rat-gui-3.004.5-raccoon-linux.AppImage | 3D0E308C592FBCD659A0363F210E26F0BE7A5218AEFB575B6DBBA242DCD5E5CF |
| Windows, offline | rat-gui-3.004.5-offline-windows.exe | AD5E61EBA14B788E34345FB6EE80790AF45C49A35075933064A485DCE065B836 |